
Merging the precision of modern technology with the soul of natural timber to create bespoke pieces of art.

These miniature Dutch canal house facades are meticulously carved from birch plywood, capturing the iconic architectural charm of Amsterdam's waterfront. Each piece is individually stained in a variety of curated colors to bring the diverse palette of the city to life.
To ensure a secure and lasting hold, two powerful neodymium magnets are precision-pressed into the back of each facade, blending functional strength with artistic detail.

A triple hanging pendant light crafted from three old glass bowls of varying sizes and reclaimed pine wood. The mounting plate at the ceiling level was handcrafted along with tapered wooden mounts that connect to the tops of the textured glass shades — one large (Ø25 cm) and two smaller ones (Ø20 cm). Features a transparent cable with adjustable length for clean installation.
This project required drilling holes in three bowls instead of just one, creating openings at different positions on each bowl to accommodate the varied mounting setup. Everything else followed the same process as the single-point version: tung oil finish brings out warm tones against walls, and combining vintage glass with CNC-milled wood components creates a unique blend of old-world charm and modern craftsmanship.

A single hanging pendant light crafted from an old glass bowl and reclaimed pine wood. The mounting plate at the ceiling level was handcrafted along with the tapered wooden mount that connects to the top of the textured glass shade. Features a black cable with adjustable length for clean installation.
Build notes: This project marked my first time drilling holes in glass in many years, working carefully through both sides of the bowl to create openings for mounting and wiring. The tung oil finish brings out warm tones against walls. Combining vintage glass with CNC-milled wood components creates a unique blend of old-world charm and modern craftsmanship.

A foldable beach chair of my own design, crafted from okoumé hardwood with a seat of traditional handmade fabric from Madeira. It folds flat to just 5 cm — light enough to carry to the beach, yet sturdy enough to relax in for hours.
This is the second iteration. The first chair showed its limits after real use — the wood was too soft and the screws too weak — so I rebuilt it from scratch. This time the entire design lived in a parametric technical drawing first: complete documentation and a 3D assembly before the first cut, with properly sized screws and bolts throughout.
Build notes: Designing parametrically before cutting paid off — every dimension stayed consistent and every joint was planned ahead. Softwood and undersized hardware don't survive real use; hardwood and properly sized fasteners are worth the investment.

Handcrafted from jatoba and ash, this stool came to life during an intensive woodworking course. It was my first time working with a planer, jointer, and bandsaw — every piece was milled, dimensioned, and fitted by hand.
The stool is assembled entirely with traditional joinery and glue, without a single metal fastener, and finished with a light coat of oil that brings out the warm, contrasting grain of the two woods.

Unique handmade world map made of recycled birch plywood, CNC milled for a beautiful 3D relief. A stylish decoration for the living room, office, or hobby room. Ready to hang, finished with tung oil.
Made by TerraMadera. Also available in other sizes or made to measure upon request. Custom requests are also possible. Feel free to send a message if you have any questions or are interested.

Unique mathematical wave pattern made of plywood, CNC milled for a beautiful 3D relief. A stylish decoration for the living room, office, or hobby room. Ready to hang.
Made by TerraMadera. Also available in other sizes or made to measure upon request. Feel free to send a message if you have any questions or are interested.

Modern garden armchairs of my own design, crafted with concealed joinery for a clean, screw-free look. The high-gloss yacht varnish finish catches light beautifully, while the hand-woven seat — made from 3 mm nylon cord — adds both comfort and textural contrast.
The design started with Pinterest inspiration and evolved through a full-scale 1:1 paper drawing into a thin plywood template. Every component was cut from a single wide, thick plank using a bench saw, with all edges softened by hand router for a refined, rounded profile.
An earlier prototype used a simpler wood-protection finish and a lighter seat frame that proved too delicate. This final version addresses both: the frame is sturdier, and the finish deepens from stain into yacht varnish for lasting outdoor durability.
Build notes: This project was a hands-on education — concealed screw joinery, chair rigidity, wood staining and varnishing, and nylon cord weaving. On the material front: evergreen wood sheds considerable resin, making it less than ideal for furniture. And a practical reminder: patience with drying times between stain and varnish pays off.
Our process begins with the precision of CNC milling, allowing us to explore complex geometries that were previously impossible in wood.
But the machine is only the beginning. Every piece is painstakingly hand-sanded and treated with natural oils, ensuring that the final work retains the warmth and imperfection of the natural world.
Explore available one-of-a-kind pieces and limited edition sculptures ready for immediate shipping.
Experiment with organic geometries. Use our digital tool to visualize the flow of your custom relief.